Solvent Extraction Process We offer solvent extraction process which is known among our valued clients for its effectual functioning. Below mentioned is its process:

• The prepared material from Preparatory section is recieved in the Feed Hopper through Rotary Valve.
• The material in the hopper and the rotary valve together constitute an effective vapour seal while the latter also serves to regulate the feed.
• The hopper is further provided with the special switches for high level and low level indications.

If the energized stops of the band conveyor of the extraction then the high level indication helps in transmitting the audio signal ad video signal to the preparatory section for preparatory operator to take corrective measures. The band conveyor moves over rails suitably located inside the Extractor and rides on specially constructed sprockets at either end. The speed of the band conveyor is easily adjustable within desired limits. An adjustable damper enables the regulation of height of bed of material on band conveyor. The Glamptech Extractor The GLAMPTECH Extractor is the long horizontal vessel which is rectangular in cross section in the MS construction. It has the articulated band conveyor which is inside the extractor receives material from feed hopper. Below mentioned is its process:

• The band conveyor moves over rails suitably located inside the extractor and rides on specially constructed sprockets at either end.
• The speed of the band conveyor is easily adjustable within desired limits.
• An adjustable damper enables the regulation of height of bed of material on band conveyor.

For the perfect spray of the solvent on the moving bed, it has series of sprayers located above the band conveyor. Special spray breakers help in effective distribution of solvent over the entire width of moving bed. The process includes:

• Each spraying section is followed by a draining section.
• Fresh slovent is admitted into the Extractor near the discharge end of the moving bed of material.
• Full miscella is recovered from the initial stage.
• It makes sure the effective flow of material and the solvent.

After increasing the oil content in each hopper, the miscella circulates in the closed circuit in each section by overflowing from each hopper. So in each section there is equilibrium between the oil extracted from the seed in corresponding section and the difference in oil content of solvent overflowing the preceding hopper together with the solvent overflowing the following section. With the high pressure jet spray, cleaning of the band conveyors is done and with the spray of fresh solvent at band conveyor, ensures the golden cleaning of the mesh and helps in the elimination of choking of mesh and channeling.