We can offer uv curable laminated safety glass
adhesive: TH0900, Outline This product, single
component, is modified acrylic anaerobic adhesive.

It solidifies with light, and easy to use. application It is used for producing architectural safety glass, bulletproof glass, decorative glass with ice-ripping patterns and other laminated production.

The laminated glass produced with this adhesive complies with national standard (gb9962-99) "laminated glass". Through technical integration from many experts and the experience of our company in these years, now we have
realized three-dimensional even distribution of adhesive in materials in various fields in our company. Therefore, it is possible to make isotropic improvements of physical properties of materials. At the same time, a variety of unique features are endowed materials, such as antimicrobial, antistatic, wear-resistant, vibration-resistant, anti-skidding, noise reduction, wave absorption, anti-aging and impact-resistant, as well as damp proof, catalytic properties, semiconductor, piezoelectric.

The strength of Monomer reaches or approaches to theoretical values of chemical bond. instructions
1. Cleaning: Scrub glass with acetone and then dry it.
2. Edging: Edge around two pieces of glass with PVB film (3-5 mm width) infiltrated in adhesive to form cavity, and clamp with pliers. Be sure to set aside room for filling adhesive.
3. Filling glue: Fill the cavity slowly with degassed adhesive loaded in film bags, and then settle it still for 6 to 8 minutes.
4. Exhausting: Hit glass slightly and exert certain pressure, try to exhaust the air dissolved in adhesive. Gradually level glass, quickly seal and fix with a clamp.
5. Solidifying: Examine carefully and make sure there is no bubble, and level laminated glass filled with adhesive in sunlight (or ultraviolet lamps), move the clamp to solidify it with enough light after 30 minutes.