Using solar power charge and Dynamo power charge and AC charge, inside Ni-cad 2A 1200MA, AM540-1700KHz, FM88-108MHz radio, LED light and siren.

Use solar power to recharge the Ni-Cad batteries by putting it under full direct.

1, Sunlight. Set the charge selection switch to position turn off the radio during solar power recharging. After 10 hours the radio will operate 12 hours.

2, To charge the Ni-Cad batteries using supplied AC adapter or optional car adapter set the charge selection switch position it is recommend to turn off the radio when charging .Plug in the AC/DC adapter into the radio and the adapter into the wall outlet. After 5 hours of charging the radio will operate for 12 hours.

3, Using dynamo power to charging the batteries. Set the charge selection switch position, rotate the dynamo gently clockwise in moderate speed.make sure the radio is turned off. After 100-200 times of cont inuous rotating, the radio will operate for 30 minutes in 1/3 Volume.

Products color: blue and pink ( satisfy with client requirement)

Packing 65306 36*51.5*31.5cm 10pcs/carton 8.3kgs/carton.