Offering piston valves:

- It is a Seat less & G landless valve:

- The valve up to the size 6 does not have any stuffing box.

The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made of asbestos PTFE and does not rotate; hence there is minimum ware.

The only warring part is the packing ring and that to after an extensive use. A ported lantern bush separates the two packing rings.

The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush, which in turn presses the bottom ring. This is done by keeping the valve in closed position.

Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the valve is when any leakage is observed from the hole of the bonnet, specially provided for this purpose; it can be stopped on the line. This is done by tightening the nut of the bonnet evenly, keeping the valve in closed position.

The maximum thickness of the ring is utilized and when the valve cannot be further tightened to stop the leakage, It is only required to replace the packing rings. This can be done on the line itself. The pressure drop in this valve is considered as high as 18%.


APPLICATION: The valve finds it's best application in control of steam & thermic fluid line. The valve also has numerous applications in the control of liquids and gases also.

RANGE: The valves can be supplied in various metal constructions to suit the condition. The valves are available in ND/16 and ND/25 rating. The flange of piston valve can be supplied in accordance to BS, DIN, ASA, IS dimensions. The range for the valve is from 15 mm to 150mm
ACTUATION: The valves can be sup