These specifications shall cover the raw materials used in the manufacturing of Scouring Sponges, Hand Pads and Floor Pads.
Scouring Sponges:
1. 1 thick Yellow cellulose sponge with green hand pad
2. 100% polyester fiber from post consumer and industrial recycled waste
3. water-based latex resins used in binding process
4. 40 x 40 sheet
5. 50 sheets per pallet, shrink-wrapped 25 pallets
Hand Pads:
1. Green medium duty hand pad
2. 100% polyester fiber from post consumer and industrial recycled waste
3. water-based latex resins used in binding process
4. 56 x 80 linear yards per roll
5. Free loaded on pallet 100 rolls
Floor Pads:
1. All pad material is 1 thick except brown pad material can be 7/8 thick
2. 100% polyester fiber from post consumer and industrial recycled waste where possible
3. water-based latex resins used in binding process
4. 56? x 80 linear yards per roll
5. The pads shall be made of a one piece unified mat. The materials of the pads shall be formed or bonded Pads of spirally wound ribbons of interlocking fibers are not acceptable
6. All floor pad raw materials are to adhere to the specs in the document CID A-A-3004
Type II, Class 4 - Burnishing
Type III, Class 1 - Buffing
Type III, Class 2 - Scrubbing
Type III, Class 3 - Stripping
Below is the description of the five (5) types of floor pad material required:
Color          Use    
Brown          Stripping     150 rolls
Blue          Scrubbing     50 rolls
Red          Buffing          25 rolls
White          Polishing 300 rolls
Natural Hair     Burnishing 25 rolls