We are manufacturer and supplier of Grp Water Tanks.

The water quality can meet the standard requirement of GB5749 Sanitary Standard for drinking.

The wide range of panels consist of 2mx1m, 1mx1m, 1mx0.5m and 0.5x0.5m sizes, in varying configurations for use in side, bottom and top, which enables us to assemble 12290
Sealant.

All joints&bolts are sealed with Synthetic Rubber materials.

Internal&External Reinforcements 65306 For all tanks over one meter high-extra reinforcements are required. Internal steel tie rods and External steel sections are Hot Dipped Galvanized as per standard.

Physical Properties 65306 Will not corrode 65292 Long Life 65292 Normal fittings can be used 65292 Light weight and extremely strong 12290.

The sectional range is further enhanced by the Pre-insulated panel.

Fixings & Fastenings: All nuts/bolts and washers in contact with the water are of stainless steel. Non-immersed nuts, bolts and washers are either zinc plated, passivated or galvanized .


Supports For Panels: The panels shall be supported externally or internally by an adequate support system Elements of external supports shall be hot dip galvanized. Interior supports shall be chemically resistant to the quality of stored water.

Ladders: A GRP sectional tank of 1.5m depth or more shall be provided with an internal ladder made up of terials same with the supports. The external ladders shall be galvanized mild steel or equivalent.

Man ways & Inspection Hatches
Man ways are bolted & vented which are in a standard size of: 600 x 600mm. They can be alternatively supplied hinged as a Deluxe Man way Inspection hatches 450 x 450mm are supplied standard with tank(s) holding over 1000 liters.