We are offering bacterogical incubator GMP model

- This incubator is made as per guideline of GMP supplied with IQ OQ & PQ     document with calibration report for PID controller.

* Technical specification :
Triple walled construction.
Inner made of S.S.316 mirror polished
Outer made of S.S.304 dull finish.
Gap between the two walled filled with glass wool insulation of 65 mm
Heating element is made of S. S. ?U? type tubular nichrome wire with S.S. sheathing.
Heaters are placed at the right & left side of the inner chamber.
PID controller with auto tuning facility with double display to view set & current temp.
Temp. range 5 730 C above ambient to 60 730 C with accuracy of 0.5 730 C.
Silicon rubber gasket fitted on door to prevent lost of heat.
Control switch & pilot lamp are fitted on front panel supplied with S.S. rod type jali.

- Bacterogical incubator GMP model available in below sizes
Inner size
Size in inches
(W X D X H)     No.of shelves     Capacity In LTR     rating Watts
12 x12 x12     1     27     250
14 x14 x14     2     42     300
18 x18 x18     3     90     400
18 x18 x24     4     120     700
24 x24X?24      4     215     1000
24 x24 x36      5     320     1500

* Optional accessories :
- Digital timer to cut off the heater at set interval.
PID controller with printer interface to record.
Set valves & actual valves data & time.
80 column DOT MATRIX printers.
- Safety controller with alarm for temp. Overshoot.
Single 4 point/8 point data logger.