We are offering ubical shell drier oven which is a customized design based on the applications temperature requirement for these applications vary from 100oC to 300oC.

Driers are also designed with Direct and Indirect type Driers. Drier is lined with Refractory and Insulation brick Glass wool insulations to hold the Temperature up to 600o C. Driers will have two chambers in case of indirect type drier. The chambers are firing and Heating Chambers. If in case of Direct type drier the re circulation fan must be used for the forced heat transfer.

Advantage:

Our Furnaces are designed in such a way to reduce the Fuel Consumption. Our furnaces are lined with both refractory bricks and Ceramic fibre modules, in such a way to pass the flue Gas around the material to be heated, enabling high conduction convection and Radiation heat transfer. Combustion/Heating Equipments are designed to meet the requirements of furnace and Heat transfer rate. Burner will be positioned inclined to an angle, so that the flame/flue skips on the surface of the material. Better heat transfer rate through circulation and Recirculation. Our furnaces are designed for skin temperature of 65oC Maximum.

Specialties    
Manual Operating Furnace
Automatic Operating furnace
Air Fuel ratio Regulating System
Mass Flow control System
Pressure Balancing System

Optional Accessories: Pre heating the scrap before charging can be done. Recuperator to pass the combustion air into the Burner at a temperature of 150oC Minimum for fuel saving upto 40percentage

Heat Generated By Light Oil/Heavy Oil/Furnace Oil/ Natural Gas/CNG/LPG/Propane/Butane/ Bio Gas/Producer Gas