The Normal type mold laser welding machines are available in two powers 200W and 400W. Precilaser Normal type mold laser welding machines can provide customers with laser processing equipment and processing solution as well for our complete series of laser processing equipment production line.Advantages
1. High accuracy , the welding spot diameter is 0.2mm-0.5mm
2. Little affect area , no distortion of the processing parts.
3. No effect for etch after welding , low oxidation rate ,the color of the processing parts is intact .
4. No stomata or sand hole disappeared after welding.
5. Can process at the welding point , especially applicable to repairing mound requiring polishing.
6. The processing parts can reach 50-60 rockwell hardness.Applicable to material & fields
Repair cracks , collapsed horn , touched edge and damaged sealing side, welding on horniness material (~HRC60)Technical specifications
|Model ||ML-200W / 400W |
|Average laser power ||200W / 400W |
|Max laser power ||240W / 440w |
|Max energy of single pulse ||75J / 120J |
|Laser wavelength ||1064nm |
|Pulse width ||0-20ms |
|Laser welding frequency ||0.5 -100HZ |
|Spot size range ||0.2-2mm |
|Welding wire ||0.1-0.8mm |
|Power Supply ||380VAC ± 10% / 50-60HZ |
|Power Consumption ||≤ 6 KW / 12KW |
|Water pressure protection ||≤ 0.025MPa |
|Cooling water temperature ||≤ 35 degrees |
|Temperature protection ||45 degrees |
|Cooling water flow ||10L/min |
|Dimensional ||1000mm x 600mm x 1500mm |
|Weight ||≤300kg |
|Cooling Way ||Water cooling |
|Laser Type ||Pulse |